Home > Products > Electric Centrifugal Pump > 10/8S-G Sugar Plant Electric Centrifugal Pump , sand suction pump

10/8S-G Sugar Plant Electric Centrifugal Pump , sand suction pump

Category:
Electric Centrifugal Pump
Price:
1000 USD/Set
Payment Method:
T/T
Specifications
Model:
10/8S-G(H)
Port:
Beijing, Tianjin
Color:
Light Green Or Other
Sealing Type:
Gland Seal, Mechanical Seal, Expeller Seal
Applications:
Dredging In Dredger And Course Of Rivers Etc.
Transmission:
Variable Frequency Drive, SCR Speed And So On
High Light:

high pressure centrifugal pump

,

stainless steel centrifugal pump

Introduction

10/8S-G Sugar Plant Electric Centrifugal Pump , sand suction pump

 

 

 

 

Applications

  • The utility model is suitable for conveying mud, metal melting, explosive mud, dredging boats, river dredging, etc. in mines.
 
Feature
  • TType GH is a high lift pump. Dredging sand flushing mud pump. Marine sand pump. Dredging mud pump. Pump for sugar refinery. Mud pump for Tailings Transportation​

 

 

Water pump failure analysis and treatment

 


Different types of pumps, the failure of the form of expression is not the same, but in general, there are 5 common characteristics.


(1) insufficient flow;
Causes: lack of impact of water flow is the water pipe leakage, valve leakage; water plugging; water depth at the end of valve insufficiency; the pump speed is too low; the impeller sealing ring or excessive wear; high water exceed the standard.
Treatment methods: check valve and water pipe, blocked the leak source; clean water inlet sludge or blockage; water depth at the end of valve must be greater than 1.5 times the diameter of the water inlet pipe, increase the water depth at the end of valve; check the power supply voltage, improve the pump speed, to replace the sealing ring or impeller; the installation of pumps to reduce or replace the high lift pump.


(2) power consumption is too large
Cause: pump speed is too high; pump shaft bending or pump shaft and motor shaft misalignment or not parallel; selection of the pump head is not suitable; pump suction or sediment blockage; motor ball bearing damage.
Treatment methods: check the circuit voltage, reduce the pump speed; the relative position correction of pump shaft or adjust the pump and motor; appropriate lift pump; clean sediment or blockage; the replacement of ball bearing motor.


(3) violent vibration or noise of pump body;
Causes: pump installation is not fixed or water pump installation is too high; motor ball bearing damage; water pump spindle bending or with the motor spindle is not concentric, not parallel.
Handling method: install the stable water pump or reduce the installation height of the water pump; replace the motor ball bearing; correct the bent main shaft of the pump or adjust the relative position of the pump and the motor.


(4) overheating of drive shaft or motor bearing;
Causes: lack of lubrication or bearing breakage.
How to do it: add lubricating oil or replace the bearings.


(5) the water pump does not produce water
Causes: pump body and suction pipe are not filled with water; the water level is lower than the water pump filter pipe; water pipe rupture.
Processing method: remove the end of valve failure, filled with water; reduce water pump installation, and make the water pipes under the water level in the dynamic, or moving water pipes or filters and then pumping; repair or replacement of water pipes.

 

PERFORMANCE

Pump Model Allowable
Max. Power
(kw)
Clear Water Performance  
Capacity Q Head
H (m)
Speed
n(r/min)
Max.Eff.
(%)
NPSH
(m)
 
m3/h l/s
                 
10/8S-GH 560 216-936 60-260 8-52 500-1000 65 3-7.5  
10/8S-G 560 180-1440 50-400 24-30 500-950 72 2.5-5  
                 
Model Outlet diameter (mm) Speed (r/min) Flow
m³/h
Head (m) Effeciency (%) Motor Power (kw) Impeller diameter (mm) Maximum permissible particle size (mm)
                 
10/8F-G 200 500 216.00
352.80
489.60
12.50
12.00
10.80
60 Y250M-8 30KW
Y280M-8 45KW
565 178
10/8F-G 200 600 244.00
432.00
594.00
18.00
17.10
15.50
60 Y280M-8 45KW
Y315S-8 55KW
Y315M-8 75KW
565 178
10/8F-G 200 700 237.60
468.00
684.00
24.80
23.70
21.40
60 Y315M-8 75KW
Y315L1-8 90KW
Y315L2-8 110KW
565 178
10/8F-G 200 800 306.00
540.00
792.00
32.00
31.00
28.00
60 Y315M-6 90KW
Y315L2-6 132KW
JS126-6 155KW
565 178
10/8F-G 200 900 349.20
612.00
882.00
40.50
39.20
34.80
60 Y315L2-6 132KW
JS126-6 155KW
JS127-6 185KW
565 178
10/8S-GH 200 600 388.80
630.00
810.00
32.00
30.00
28.00
60 Y315M-8 75KW
Y315L1-8 90KW
Y315L2-8 110KW
711 180
10/8S-GH 200 700 443.00
731.00
943.00
43.20
40.80
38.00
60 Y31512-8 110KW
Y315L2-6 132KW
JS128-8 155KW
711 180
10/8S-GH 200 800 504.00
839.00
56.50
52.80
60 JS127-6 185KW 711 180
                 
10/8S-GH 200 500-950 750-1300 20-75 70 560 686 180
                 

 

 

10/8S-G  Sugar Plant Electric Centrifugal Pump , sand suction pump10/8S-G  Sugar Plant Electric Centrifugal Pump , sand suction pump10/8S-G  Sugar Plant Electric Centrifugal Pump , sand suction pump

 

 

 

 

Send RFQ
Stock:
MOQ:
1 Set